arduino-ovo

ovo.h aims to make uninterrupted main loop possible for your program on any arduino board.

Functions Spec

---

setTimeout()

Params:

• auto function Your function. Lambda Expression is allowed!
• int delay Time to delay in milliseconds.

---

setInterval()

Params:

• auto function Your function. Lambda Expression is allowed!
• int delay Time for every interval in milliseconds.

---

Arduino Official Blinker Example

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);                       // wait for a second
  digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);                       // wait for a second
}

OvO Example

#include "ovo.h"

// the setup function runs once when you press reset or power the board
void setup() {
    // initialize digital pin LED_BUILTIN as an output.
    pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {

    setTimeout([]{setInterval([]{digitalWrite(LED_BUILTIN,HIGH);}, 2000);},1000);
    setInterval([]{digitalWrite(LED_BUILTIN,LOW);}, 2000);
}

---

setSwitch()

This function help you switch function as planned in main loop.

Params:

• auto function1 Your first function. Lambda Expression is allowed!
• auto function2 Your second function. Lambda Expression is allowed!
• int delay1 Time for every interval in milliseconds for function1.
• int delay2 Time for every interval in milliseconds for function2.

Example for Blinker

#include "ovo.h"

// the setup function runs once when you press reset or power the board
void setup() {
    // initialize digital pin LED_BUILTIN as an output.
    pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {

    setSwitch([]{digitalWrite(LED_BUILTIN,HIGH);}, []{digitalWrite(LED_BUILTIN,LOW);}, 1000, 1000);
}

---

Class slowWrite

Use this class to make a rough voltage change slower.

slowWrite.set()

Use this function to set the pin and delay info.

Params:

• int pin Here is your pin number.
• int delay How slow you want a voltage change from 0 to 1 in milliseconds.

---

slowWrite.run()

• Put this in your main loop.

---

slowWrite.high()

• To change the pin voltage from 0 to 1.

---

slowWrite.low()

• To change the pin voltage from 1 to 0.

---

Example

#include "ovo.h"

slowWrite m; //Must before setup()

// the setup function runs once when you press reset or power the board
void setup() {
    // initialize digital pin LED_BUILTIN as an output.
    pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
    m.set(LED_BUILTIN, 2000); //The objected pin is LED_BUILTIN, every voltage change takes 2 sec

    //The led will on and off for every 3 sec
    setTimeout([]{setInterval([]{m.high();}, 6000);},3000);
    setInterval([]{m.low();}, 6000);
    
    m.run(); //This must be put here
}

---